GL-9089
GL-9087
GL-9086
GL-9073
GL-9084
GL-9031
GN-9289
GN-9273
GN-9261
GN-9287
GN-9386
GN-9285
GN-9284
GN-9231
GN-9222
GN-9212
GN-9251
GN-9289
Modbus TCP / EtherNet IP adapter
- 2 x Ethernet 10/100Mbps
- Up to 63 expansion slices
- Built-in Ethernet switch
- 10pt removable terminal block
Facts
General description
| Article number | 100-8015 |
| Warranty | 2 year |
| Article status | Active |
| Shock operating | IEC 60068-2-27 (15G) |
| Vibration resistence | Sine vibration (based on IEC 60068-2-6), 5 ~ 25 Hz: ±1.6mm, 25 ~ 300 Hz: 4G, Sweep rate: 1 octave/min., 20 cycles, Random vibration (based on IEC 60068-2-64), 10 ~ 40 Hz: 0.0125g²/Hz, 40 ~ 100 Hz: 0.0125 → 0.002g²/Hz, 100 ~ 500 Hz: 0.002 g²/Hz, 500 ~ 2000 Hz: 0.002 → 1.3 x 10-4g²/Hz, Test time: 1hrs for each test |
| Industrial emissions | EN 61000-6-4/A11: 2011 |
| Industrial immunity | EN 61000-6-2: 2019 |
| Installation position | Horisontal, Vertical |
| Product certifications | CE, UL, cUL, FCC, RoHS, China RoHS, Reach |
| System power | Nominal supply voltage: 24 VDC, Voltage range: 60℃: 18~32 VDC, 70℃: 18~26.4 VDC, Output current limitation: 1.5 A, Reverse polarity protection |
| Power dissipation | Max. 70 mA @ 24 VDC |
| Current for IO module | 1.5 A @ 5 VDC |
| Isolation | System power to internal logic: Non-Isolation , System power I/O driver: Isolation |
| Field power | Nominal supply voltage: 24 VDC, Voltage range: 60℃: 18~32 VDC, 70℃: 18~26.4 VDC, * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max current field power contact | DC 10 A max |
| Weight | 165 g |
| Module size | 54x99x70mm |
Communication
| Station type | Slave |
| Max expansion ports | 63 slices |
| IO data size | Input 128bytes / Output 128bytes |
| Max length bus line | 100 m |
| Max network nodes | Limited by Ethernet Specification |
| Baud rate | 100Mbps, Auto-negotiation, Full duplex |
| Settable node address | IP-address |
| Bus connection | 2 x RJ45 |
| Other serial port | RS232 for MODBUS RTU |
| Serial configuration | Node: 1 (Fixed), Baud Rate: 115200 (Fixed), Data bit: 8 (Fixed), Parity bit: No parity (Fixed), Stop bit: 1 (Fixed) |
| Indicator | 6 LEDs, 1 Green/Red, Module Status (MOD), 1 Green, Physical Connection (DLINK), 1 Green, Exchange Data/Traffic Present (RUN/ERR), 1 Green/Red, Expansion I/O Module Statsus (IOS), 1 Green, System Power Status, 1 Green, Field Power Status, , 2 LEDs (each RJ45 Connector), 1 Yellow, Link/Active, 1 Green, Not used |
| Module location | Starter module left side |
| Field power detection | ~14 VDC |
Environmental
| Mounting | 35mm DIN rail |
| Operating temperature | -20 ~ 60℃ |
| Storage temperature | -40 ~ 85℃ |
| UL temperature | -20 ~ 60℃ |
| Relative humidity | 5 ~ 90% non-condensing |
Resources
Manuals
| File name | Date | |
|---|---|---|
| Overview of the G-series manuals - online | ||
| GN-9289 manual - online |
Program examples/Start-up
| File name | Date | |
|---|---|---|
| G series, GT-5112 Program example X2 Control and GN-9289 | 2022-10-10 16:53:43 | |
| Quick start guide, Modbus TCP, Ethernet IP network adapter, GL-9089 and GN-9289 - SUEN00416 | 2023-04-18 10:58:10 | |
| G Series, Nexto Xpress and GN-9289, Parameter Set of I/O modules | 2022-10-03 10:27:36 | |
| G series, X2 Control, Parameter Set of I/O Modules connected to GN-9289 or GN-9273 | 2022-10-10 16:53:46 | |
| G series, X2 Control, Example with GN-9289 | 2023-03-22 10:52:36 | |
| Beijer GN-9289 with Allen Bradley RS Logix video tutorial | 2023-10-12 08:18:09 |
Knowledge
| File name | Date | |
|---|---|---|
| G series, GN-9372, GN-9289 Default setting | 2022-10-10 16:46:17 | |
| Firmware upgrade instruction for G- and M-series network adapters | 2024-12-02 10:26:06 | |
| CNT-8412 (5-pin) powerplug / connector to GL-9xxx network adapters and PIO | 2025-01-09 13:40:42 | |
| Ethernet port specification of G- / M-series PIO and Network adapters | 2024-05-03 07:55:52 | |
| FnIO M-, G- and S-series Serial number and Production date | 2023-07-20 11:30:16 | |
| Shock resistance of G- and M-series (IEC 60068-2-27) | 2022-09-06 14:16:00 | |
| How to download Free software packages from SmartStore | 2023-08-08 15:52:30 |
Software
| File name | Date | |
|---|---|---|
| G series, BootP Server for IP-setting at GN-9372 and GN-9289 | 2022-09-20 15:49:06 | |
| IO Guide Pro 1.2.0.3, for S- and G-series | 2024-09-24 08:05:44 | |
| IO Guide Pro 2.0.0.0 beta (20231128), for Beijer G- and M-series | 2024-09-24 08:11:21 | |
| IO Guide Pro 1.4.0.0 beta2, for Beijer G-series | 2024-09-24 08:02:50 |
Firmware
| File name | Date | |
|---|---|---|
| Release Notes for GN-9289_BE | 2024-10-28 10:31:46 | |
| G series, GN-9289 - Firmware update | 2024-03-20 10:44:27 |
Configuration files
| File name | Date | |
|---|---|---|
| G series, GN-9289, EDS-file for Ethernet/IP | 2023-03-01 17:25:27 |
Product information
| File name | Date | |
|---|---|---|
| Conversion guide for alternative products between S-series remote IO to G- or M-series | 2022-09-06 11:38:29 |
Drawings
| File name | Date | |
|---|---|---|
| G- and GL-Series Drawing, 3D / 2D CAD files (Mechanical drawings) | 2023-02-23 15:06:30 | |
| Remote IO, FnIO-G cad drawings | 2022-11-29 15:31:16 |
Brochures
| File name | Date | |
|---|---|---|
| G series brochure, BREN636 (english) | 2022-09-26 08:38:34 |
Certificates
| File name | Date | |
|---|---|---|
| UL & cUL Certificate of compliance - Beijer G-series | 2023-05-26 08:32:02 | |
| CE DoC (Declaration of Conformity) for Beijer G-series modules following the EMC & LV directive. | 2025-01-13 09:34:13 |
Limited availability
GN-9289
Modbus TCP / EtherNet IP adapter
EOL - End Of Life:
-
LTB - Last Time Buy:
-
LTD - Last Time Delivery:
-
LTR - Last Time Repair:
-
Replacement Parts:
