IX populate combobox from c# script

​07.10.2025

A customer used the dynamic enable operator input in MultipleChoice controls a lot in his EXTER projects.
as this isn´t possible in iX, here are 2 workarounds. 

1. when disabling the caching of screens with dynamic ComboBoxes the solution is simpler / less script code
2. with screens cached you have to restore the original content of the ComboBoxes / more code

• ComboBoxDynamic.zip
• ComboBoxDynamic_Screens_uncached.zip

Copy Debug log to accessible folder

• CopyDebugLog.zip

X2 Date time picker script

​02.02.2023
X2 series.

This sample project let the user select a date and time from a calendar type of object and stores\presents the selected date/time in various formats in Global tags.

• X2_DateTimepicker.zip

Add Tags to Tagmonitor by script

​25.03.2019
IX dev. 2.40SP1
X2 control 10 (Should work on all platforms)

Attached sample project adds predefined tags to the TagMonitor object, making it easy to switch between  several different sets of tags in the list

• TagMonitor.zip

IX alarm info request lookup in pdf by page index

​31.08.2021
IX developer 2.40 SP6
Demo driver

Consept:
This sample project uses An alarms uniq ID to produce an index.
This index is used to show aditional info from a PDF document, regarding the selected alarm, when the user click the Info button. 

 Details:
The Main script is in the alarmserver, and fires with the "AlarmServer_AlarmEventInfoRequested" event.

The index is made from the  the alarm name column (first column in the alarm configurator that normally has no function for us ), which has default values: AlarmItem0, AlarmItem1 etc. 

The script extract the number part 0,1,2 etc to a global tag, to be used as a page index in the PDF viewer object.  Finally the Popup screen is opened.

In the popup screen The Pdf is opened, using the Alarm Taxt as Title,  and the page corresponding to the index is shown.

PS.
If several alarm groups are in use, Each group will default start with the name AlarmItem0. This will make duplicates. So in this case you must manually verify that the number part in the names are uniq, and consistent.   

• AlarmInfoIndexing.zip

Program example iX Developer: Modbus TCP communication between any X2 and BFI-P2/H3.

This is to be found in Smart Engineering, SER0050. Either download the manual further down for SER0050 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-H3 and BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

​​

• SER0050_QS_ iX to BFI-H3-P2 ModBusTCP_V1.0.0-EN.pdf

Program example iX Developer: Modbus RTU communication between any X2 and BFI-E3, BFI-P2 or BFI-H3.

This is to be found in Smart Engineering, SER0051. Either download the manual further down for SER0051 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3, BFI-H3 or BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
  
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0051_QS_ iX to BFI ModBusRTU_V1.0.0-EN.pdf

Program example iX Developer: Modbus TCP communication between any X2 HMI and BFI-E3.

This is to be found in Smart Engineering, SER0060. Either download the manual further down for SER0060 or the complete Smart Enginnering here.

Example shows how X2 Base7 control/monitor up to 63 BFI-E3 in a Modbus TCT network. Functions supported are: 

Program example support:

• Works only towards BFI Frequency inverter BFI-E3-MTP 
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
  
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0060_QS_X2 to BFI-E3 ModBusTCP_V1.0.0-EN.pdf

iX Templates for E-key and X-Key

Templates for E-key and X-key, created as popups.

Unzip the *.zip file in < C:\Users\Public\Documents\Beijer Electronics AB\iX Developer 2.40 SP4\Screen Templates > and the templates will be available under “Add Screen”>Templates

Connect an action to the buttons, LED-colourfärg/Led-blink as dynamic if used.

• E_key_popup_X2Pro12.zip
• X_key_popup_X2Pro12.zip

Quick start guide - Connect X2 HMI with Nexto PLC, SUEN00414

• Connect X2 with Nexto SUEN00414.pdf

Ping from IX x2 terminal

​27.02.02
IX dev. 2.40 SP4

The attached project sample (X2 control 10), Pings a fixt IP adress every 30 sec, and set\rst a global tag accordingly, to show the status of the connection.
All code is in a scriptmodule, initiated by the "created" event.

The actual Ping syntax is: (returns true\false)
if(Core.Api.Service.ServiceContainerCF.GetService<Neo.ApplicationFramework.Interfaces.INetworkService>().Ping("10.0.0.1", 100))

• Ping.zip

iX Developer - Top10 Alarm list, based on count and/or duration

​​You easily implement a Top10 Alarm list in iX.

1. Add a DatabaseViewer control to a screen

2. Add the following script to the screen:

void AlarmScreen_Opened(System.Object sender, System.EventArgs e)
{
DatabaseViewer1.IsControlVisible = false; //Optional, to hide manual controls
}

void btnTop10_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY COUNT(*) DESC,[Duration (s)] DESC","Database.db");
}

void btnTop10Duration_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY [Duration (s)] DESC, COUNT(*) DESC","Database.db");
}

• Top10_Alarms.zip

Quick Start Guide, MELSEC FX5U/FX5UC Ethernet to X2 series, SUEN00402

• SUEN00402 - MELSEC FX5U_FX5UC Ethernet to X2 series.pdf

Quick Start Guide, MELSEC Qnn QJ71E71 Ethernet to X2 series SUEN405

​Communication driver in X2: MC Protocol

• MELSEC Qnn QJ71E71 Ethernet - X2 series SUEN00405.pdf

Quick Start Guide, MELSEC iQ-R Ethernet - X2 series SUEN00406

​Communication driver X2: MC Protocol

• MELSEC iQ-R Ethernet - X2 series SUEN00406.pdf

Quick Start Guide, MELSEC QnUDE Ethernet to X2 series, SUEN00403

​Communication driver X2: MC Protocol

• SUEN00403 - MELSEC QnUDE Ethernet to X2 series.pdf

Program example BCS Tools and iX: EtherCAT communication between Nexto PLC/X2control and BFI-P2 BFI-H3

This program examples can be Auto configurated in BCS Tools 3.62. The Auto configuration for EtherCAT is turned ON/OFF in BCS Tools, Tools/Options/Device Configuration.

This program example is also to be found as Smart Engineering object, SER0017. Either download the manual further down for SER0017 or the complete Smart Engineering here. If using this program example make sure that Device Configuration is turned OFF.

Program example is intended for a Nexto, X2-control/Marine/Extreme communicating by EtherCat with 2 pieces of BFI-P2 and BFI-H3.

Version of Library file for BFIEtherCat functionblock is 2.0.0.0.

Program example support:

• Works only towards BFI Frequency inverters
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
  
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status.
• Read and Write of parameters
• Read of Drive type, communication type, Input voltage, Power, Frame size, Firmware and serialnumber 
  

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One iX-project to monitor/control BFI through the PLC. 

Another PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50.

• SER0017_QS_BFIP2H3_EtherCat_V2.0.0-EN.pdf

Program example iX Developer: Project for PLC-program generated in BCS Tools or Smart Engineering for PLC communicating with BFI by bus.

​The iX project can be used for Beijer PLC communicating with BFI. It supports PLC-programs generated in BCS Tools 3.62 or Smart enginnering objects SER 0014, 0015, 0017, 0020, 0039, 0040 and 0077. Project created in iX-version 2.50.

PLC can be X2(control/Marine/Extreme), Nexto Xpress, Nexto Modular or PIO.

Buses can be one of or a mix of EtherCat, Modbus TCP, Modbus RTU, CANopen, Profinet, EtherNet IP.

Frequency inverters can be BFI-E3, BFI-P2 or BFI-H3.

• iX_BFIAllbusesV105.zip

Program example BCS Tools and iX: Modbus TCP communication between Nexto/X2control/PIO PLC and BFI-E3

This program example can be Auto configurated in BCS Tools 3.62.

They are also available as Smart Engineering, SER0020.  Either download the manual below or the complete Smart Enginnering here.

Program examples are intended for a Nexto PLC NX-30xxx or XP3xx, X2-control/Marine/Extreme or PIO communicating by Modbus TCP with 2 pieces of BFI-E3 Version of Library file for BFICanOpen functionblock is 1.0.0.1.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3-xxx-MTP
  
• Activate/Deactivate communication
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber 

One PLC-program example is intended for Nexto Xpress XP300 and any X2 HMI.

One PLC-program example is intended for X2 control and it's built-in X2 HMI.

One PLC-program example is intended for PIO, GN-9373, and any X2 HMI.

One iX-project made for any X2 to monitor/control BFI. 

One PLC-program example is intended for Nexto Xpress XP340 with Webvisu.

Used softwares are BCS Tools 3.62 and iX Developer 2.50

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Program example BCS Tools and iX: Modbus RTU communication between Nexto/X2control/PIO PLC and BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC with CODESYS (all image versions) - Startup, recommendations and limitations (SUEN00392)

​The attached document provides important information when working the Beijer Electronics X2/BoX2 series range of products with embedded CODESYS control

Note!
BCS Tools 3.30 and newer is the supported and common software platform and shall be used for X2/BoX2 and G-series as well as the Nexto range of products.

Please visit https://smartstore.beijerelectronics.com/

More details can be found in SUEN00392

• X2_BoX2 series with Codesys – Recommendations and limitations SUEN00392F.pdf

Program example Px (X2/BoX2 control/Nexto Xpress/Modular - BSD v3.38

​This program example contains everything you need in order to get your X2/BoX2/Nexto control solution with BCS Tools and BSD products up and running using basic servo functionality.

Programming environment needed for this example:
- iX Developer v2.51
- BCS Tools v3.63

The startup example contains:
 - BCS363_Px_v338.projectarchive : BCS Tools project for X2 control 7 (powerfail) and 8 servo axis.
 - BCS363_Px_v338_NX3008.projectarchive : BCS Tools project for BCS-NX3008 and 8 servo axis.

 - iX251_X2_Pro_7_BSD_CSx_Px_v505 : iX project version 5.05 for X2 control 7"

Note!

• iX project iX251_X2_Pro_7_BSD_CSx_Px_v505 must be used in combination with BCS Tools project BCS363_Px_v338.projectarchive due to name changes of variables.
  
• Name change SC -> CSx_Px, CS = Cyclic Synchronous, P = profile mode, x = generic term for either position (P), velocity (V) or torque (T)
  

• BCS363_BSD_Px_v338.projectarchive
• BCS363_BSD_Px_v338_NX3008.projectarchive
• iX251_X2_Pro_7_BSD_CSx_Px_v505.zip

IX otf and ttf fonts

​23.11.2022
IX developer 2.40Sp7

X2 terminals (actually windows CE \ wec2013 ), do not support the newer OTF font standard ( OpenType Font) . Only TTF ( true type font) are supported for terminal targets, however on a PC RT ( Run Time ) you can use OTF. 

It is possible to convert a OFT font to TTF: https://cloudconvert.com/otf-to-ttf

iX Developer SP7 - 2.47.473 Release information

• iX240SP7 LastMinuteNotes iX PIEN341L.pdf.pdf
• iX240SP7 ReleaseNotes iX PIEN340Q.pdf.pdf

Driver MODICON Modbus Slave: Command XDNCW

Windows CE versions, X2, iX, E1000

• WindowsCE_X2_iX_E1000_.xlsx

Creating a custom Welcome screen / Startup screen on a X2 operator panel

X2 series
It's possible to create a custom Welcome Screen / startup screen, this is described in detail in the Configuation and Image manual:
X2 Configuration and Image manual

iX - SMTP - Using Gmail servers using App password

​​​Google has dropped the support for "less secure apps" and no longer supports the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password.

From now on an "App Password" is required when sending emails from iX panels that are configured to use Gmail's SMTP servers. Please notice that 2 step verification is required in order to create an app password. 

Create and use App Password

1. Login to you Google account.
   
2. Make sure 2-Step Verification is enabled.
   
   
3. Generate an App password. Select "Mail" as app and for device select "Other" and enter a custom name. Click Generate to get an app password.
   
   
4. Then use the following settings for the email device in the iX application
   
   From Email Address: [Gmail address]
   SMTP Server: smtp.gmail.com
   Port: 587
   Encryption Mode: ExplicitSSL
   Authentication Mode: AuthLogin
   Username: [Gmail address]
   Password: [The App Password]
   
   
   

• Set gmail App password .pdf

X2 enter service menu with an USB mouse

​13.02.2025
X2 series b1103 

You can enter the service menu with the USB mouse like this:

• Reboot
• Hourglas shows for a while
• Hourglas go away.
• Screen is black
• Hourglas is back again
• NOW press and hold the left mouse
• When touchcalibrat screen appears, release and click to enter the service menu.

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. These procedures are described:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

ARTI - 8bit data types not working

​ARTI driver 4.16.05

Normally the use of 8bit data types is supported if the option "Load symbols when connecting" = TRUE.

With version 4.16.05 the driver will constantly report "Datatype mismatch" if any kind of 8bit datatype, defined in the controller, is in use.

Workaround:

• Use the previous driver 4.15.04
  
• Change the datatype in the controller to 16bit
  

Extract from driver help.

• CoDeSys_ARTI_Pre_4_15_04.zip

OPC ua settings in Phoenix plxnext engineer

​04 october 2022
To use IX OPC client with Phoenix PLC's some settings are needed in the PLxnext engineering tool, and also the PLC Webserver:

Basic settings "Visibility of variables" = "Marked"

Subject1 = HMI ip adress
UNcheck "Use the thruststore for client authentication" AND " Check application URI against client certificate. 

To get the NS ( namespace ) settings in IX developer correctly, the easiest way is to browse the Phoenix server from IX developer, by clicking the small down arrow at the right side of the "ADD" button in Tags, and select "Add tags from OPC server" . Then the nemespaces are set automaticly. Otherwise you can see them in the screenshot below:
 

WEB Server:
Disable Autentication in WBM in the PLC 
Login with "admin" and the password on the plc lable

• phoenix_OPCUA.docx

Image Sticking

When utilizing TFT LCD HMI panels in applications where a fixed or partially fixed image remains displayed on the screen for extended periods of time, users may experience a phenomenon referred to by the LCD industry as Image Sticking. Image Sticking - sometimes also called "image retention" or "ghosting"- is a phenomenon where a faint outline of a previously displayed image remains visible on the screen when the image is changed.

Image sticking can be caused by:

• Static images
  
• No Screensaver
  
• Sharp contrast transition (e.g. black / white)
• High ambient temperatures
  

• Use the screensaver functionality.
  
• Changing constantly  between static and dynamic images
• Avoid excessive brightness differences between foreground and background elements
• Use colors with similar brightness
• Use complementary colors in follow-up images
  

Manually Refresh / Update of ix / X2 screen , audit trail viewer and database viewer

​31.10.2025

This is unfortunately not possible!

X2 platform usb mouse if damaged touch

​20.11.2024

X2 platform in general
(tested on Marine and pro) 

On The E1000 and txA / txB platforms one could, in cases of damaged touch surface, disconnect the touch foil cable from the mainboard and emergency operate the unit with an USB mouse. With the X2 platform however, when disconnecting the touch foil cable, the USB mouse are not able to override the same way. The pointer is stuck in the upper right corner (actually it is invissible until you move the mouse quite hard).

The only workaround left, is remote control via VNC. This stil works, but requires ofcours a computer with a vnc client installed, and that the remote access feature is enabled in the project. 😥  

Best Practice Database on SD card or flash memory

​This document provides recommendations for how to setup and use the X2 HMI panel in the best way to reduce unnecessary wear on the flash memory.

For more information: Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF

• MAEN360.pdf

Quick start guide, Disable / Suppress Flashwear warning dialogue on X2 series SUEN00411

​30.01.2023
X2 series 

This Document describe how to enter the service menu, go to settings in the diagnostics part, and supress the flash wear warning message.

• SUEN00411 Suppress FlashWear warning .pdf

Max number of recipe items / tags

iX developer 2.40 SP7

The help file states that maximum 256 recipe items can be used. This is wrong, maximum number of recipe items / tags / columns is 998. 
When attemting to add more, iX will display a popup with an error message.

Convert from Exter/E1000 To X2 Series

The Mitsubishi E-Series hardware products and E-Designer software have been manufactured by Beijer Electronics for Mitsibishi for many years. In 2015, this partnership ended. Beijer-branded E1000 HMIs are now orderable directly through Beijer or one of its authorizated distributors. As your Mitsubishi terminals need to be replaced, Beijer provides a smooth transition by offering three paths:

Direct Replacement Path (E1000 panels) - A direct hardware and software replacement for most E1000 panels. The Beijer-branded E1000 panels are identical to the Mitsubishi-branded E1000 panels, only the rear labeling is different.

Direct Replacement Path (EXTER panels) - A direct mechanical drop-in hardware replacement is available for most E1000 products. The replacement products use your existing E-Designer applications after a simple project conversion to Information Designersoftware, a service offered by Beijer Technical Support

Upgrade Replacement Path (X2 panels) - Enhance your future HMI offering with modern X2 hardware and state-of-the-art iX Developer software including graphics, scripting, alarms, recipes, remote access and multiple communication drivers. iX Developer supports and integrated E-Designer to iX Developer project conversion feature (as well as Information Designer to iX Developer).

The following is a comparison chart of the older, discontinued E-series/CIMREX HMI panels to the current E1000/EXTER HMI panels, as well as the closest versions to Beijer''s latest X2 panels.

1 The Beijer-built E-series models were branded for Mitsubishi. The CIMREX models were the Beijer-branded versions of the early E-series models. All were discontinued a number of years ago.

2 The E1000 models are upgrades from the older, discontinued E-series models. Historically, the Beijer-built E1000 models were branded for Mitsubishi, but now carry a Beijer brand. The E1000 are now only available from Beijer or an authorized distributor; they are no longer available from Mitsubishi. E1000 programming is based on E-Designer software which can now only be obtained from Beijer.

3 The Beijer-built and branded EXTER models are virtually identical to the E1000 models. EXTER programming is based on Information Designer software. Beijer Technical Support can convert an E-Designer program to an Information Designer program, if required.

4 X2 models are not 100% replacement models for the E1000 or EXTER models. They have different form-factors; there are no X2 Keypad models; all X2 models have color displays. These X2 models are the closest versions to the E1000/EXTER panels. X2 pro models have more memory and faster processors than the X2 base units. iX Developer can import an E-Designer or Information Designer project to run on X2 models, though it may not import 100% of the functionality.

5 Adapter plates enable a smaller footprint EXTER or E1000 HMI to fit in the space occupied by a slightly larger, discontinued Exxx or CIMREX model. Note: Adapter Plates allow most E1000/EXTER models to fit the cut-outs used by the discontinued E-series/CIMREX models.

6 X2 series are Beijer main iX models. See the EOL Notifications for details.

X2 BatteryCheck

28.05.2024
X2 \ IX 2.50

There is a feature in the BeHwApi that gives the status of the battery. Specially convenient for Box2 since they have no screen. 
This feature was implementet aprox. from b906 of the firmware so an update can be needed if implementing in older terminals.

Sample code for a tagscript that use the SystemTagMinutes to set\reset a global tag according to the battery status:  (see also attached X2 Control 10 project)

• BatteryCheck_X2.zip

X2 Preemptive maintenance service warning

29.10.2020
IX \ X2 terminals 

This message: 
" ​The unit should be scheduled for preemptive maintenance service "
appears on the screen after reboot.


This feature was implemented in Firmware version 8.0 b569. 
It promts that the display or flash memory is soon to be due (liftime reached)

From Release notes one can read:
"Added support of Product health and Service time internal when eMMC flash memory and Backlight reaching end of lifetime".
Presented in Diagnostic Page and in a warning Message:
“The unit should be scheduled for preemptive maintenance service”

What can you do about this?

1. Update firmware
    - new versions of the firmware (from b894 and forward),  are much more efficient in terms of memory wear.
       So just by updating the firmware one can obtain considrable longer service time. of the unit.
       (Although IF it is a critical system, we strongly recomend that the unit should be replaced / serviced.)

2. Reduce logging 
    Data logging is normaly what mostly wear out the flash memory. So, reducing the amount of datalogging
     To what is strickly needed, would increase the remaining service time of the unit.

3. Install a SD card and Move the database to this external device. (see here for details )
   - This will reduce the wear on the internal flash, that now only will handle system operations, thus expanding
      The internal flash lifetime vastly.  ( here is the setting )

4. Replace or service the unit.
   - The repair consist of replacing the cpu board.
   - The cost will be aprox. 30-40% of a new unit. so, before desiding wether to replace or repair, 
      one should consider the age and service hours of the unit. 

Firmware Improvements

The pre-emptive message was a first stage, to provide status information of the flash memory.
However, Beijer electronics soon acknowledged that this was "to little to late". 

Newer firmware versions (b894 and forward), calculates the flashwear from the begining, and will issue
warnings at every 10% wearout, IF, and only if, the 10% wear occure faster than expected for normal
lifetime of the unit. 

You can read more about the warning messages in current firmwares here

IF warnings occure they can be anoying for the operator. And even IF measures are taken in the application,
or by updating the firmware, some warnings will occure anyway until the next 10% wear level is reached.
To fix this one need to supress the warnings for some time. this can be doned from the terminals Service
menu in the: diagnostics section

There are also implemented system tags in IX that makes it possible to monitor the flashwear from the 
IX application it selfe :

- SystemTagFlashMemoryEolInfo           :  1,2,3 [1=normal, 2=Warning(80%) ,3= Urgent]
- SystemTagFlashMemoryLifeTimeUsed : 1-11 [1=0-10%, 10=90-100%, 11=exeeded.]

System tags are available by clicking on the small down arrow at the rightmost of the "ADD button" in
the taglist:

SER-0006 MJPEG Graphical control display just a blue screen on X2 ok on PC

​24.06.2025
X2 pro with smartobject SER-0006
Axis Q1656-LE Box Camera

Works in the simulator on PC, but on the terminal its just an empty blue screen.

Solution:

X2 image - Update EBOOT require SD card to be formatted to FAT16/FAT32

Some versions of the system program to X2 require the EBOOT to be updated as well. The EBOOT is included when you create "Recovery SD" from the Image Loader. Please note that the SD card must be formatted to FAT16/FAT32 otherwise the EBOOT will not be updated even though the "Make Recovery SD Card" setting was enabled.
The file system exFAT is not supported when upgrading the EBOOT.

The EBOOT version can be verified in the diagnostics which can be opened from the service menu.

Nexto Xpress - Program example CANopen X2 Extreme as slave device

​BCS-XP325 (CANopen manager) <---> X2 Extreme 12 HP (CANopen slave)

BCS Tools 3.30, XP325 firmware 1.9.17.0
iX Developer 2.40 SP4, image 2.0 b368, CANopen driver 5.04.00

COM B in use with cable CAB112 (built-in CAN port)

• X2CanOpenSlave_iX240SP4.zip
• Xpress_X2CanOpenSlave_BCS330.projectarchive

Viewing angle X2 series

​

BCS Tools - SFC errors at compile

​Affected versions:
3.50, 3.51, 3.52
Will be solved in 3.60

Affected devices:
All devices in BCS Tools with <SP17 runtime.
BoX2 SC all variants
X2 control all variants
GL-99xx all variants
GN-93xx all variants

The reason for this is due to compatible issue between the runtime version implemented in the device and the version of the SFC library.

Workaround
Change the version in use to an older version according to the attached pictures.

• Screenshots_SFC.pdf

X2 export control and dual use

• X2 Export Control and Dual Use_B2.pdf

X2 Letter of Volatility

​​​X2 Letter of Volatility

X2 base, X2 pro, X2 marine, X2 control, X2 motion

• X2_letter of volatility .pdf

Battery test summary - X2 extreme

• Battery Test Summary BR2330A.pdf
• Battery Test Summary BR-2477A.pdf

Environmental Impact Report X2 extreme

​Environmental Impact Report X2 extreme

• Environmental Impact Report X2_extreme_rev3.pdf

MTBF summary X2 extreme

​MTBF summary X2 extreme

• MTBF Summary - X2 extreme_V2.docx

DoC ECCN for X2 series HMI

• Declaration of conformity ECCN X2 2024-03-18.pdf

​SDoC Green Passport

​SDoC Green Passport

X2 pro, X2 control, X2 motion, X2 marine

• SDoC Green Passport X2 pro, X2 control, X2 motion, X2 marine(PROD CERT - 1164496 - 1 - A1) - 1.pdf

RoHS and REACH Declaration of Conformity

• RoHS and Reach Declaration of Conformity Beijer Electronics AB (PRODCERT - 2083745 - 1 - A1) - 1.pdf

Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

​Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

• Environmental Impact Report X2_rev4.pdf

ABS Type Approval Certificate X2 extreme sealed

​ABS Type Approval Certificate X2 extreme sealed

• ABS Certificate_X2 extreme_Sealed_Variants_18-SQ1704662-PDA-DUP (PROD CERT - 1293395 - 1 - A1) - 1.PDF

ABS Type Approval Certificate X2 extreme

​ABS Type Approval Certificate X2 extreme

• 22-2286205-PDA-DUP cert_133810723.pdf
• ABS Type approval.pdf

DNVGL Type Approval Certificate X2 extreme sealed

​DNVGL Type Approval Certificate X2 extreme sealed

• DNVGL Certificate_X2 extreme_Sealed (PROD CERT - 1329944 - 1 - A1) - 1.PDF

DNVGL Type Approval Certificate X2 extreme

​DNVGL Type Approval Certificate X2 extreme

• DNVGL Certificate_X2 extreme_Panel Mount (PROD CERT - 1324411 - 1 - A1) - 1.PDF

LR Type Approval Certificate X2 extreme

​LR Type Approval Certificate X2 extreme

• LR23299349TA - Cert - Version1 - Signed.pdf

LR Type Approval Certificate X2 extreme sealed

​LR Type Approval Certificate X2 extreme sealed

• X2 Extreme Sealed - LR Type Approval (LR23389570TA - Cert - Version1 - Signed).pdf

Compass safe distance X2 extreme

​Compass safe distance X2 extreme

• Compass safe distance X2 extreme.pdf

X2 extreme (SC) / X2 extreme sealed (SC) / BoX2 extreme (SC), CE manufacturer declaration

​CE manufacturer  declaration X2 extreme x2 extreme sealed box2 extreme

• DoC CE EMC ROHS Declaration of confromity X2 extreme Variants 2200872.pdf

X2 extreme (SC) / BoX2 extreme (SC), CCC ex-zone

CCC ex-zone

• 2021312304001085.pdf
• 2021312304001085-EN.pdf
• 2021312304001086.pdf
• 2021312304001086-EN.pdf
• 2021312309000507.pdf
• 2021312309000507-EN.pdf

Manufacturer declaration: X2 extreme UKCA Declaration of Conformity

​Manufacturer declaration: X2 extreme UKCA Declaration of Conformity

• X2 extreme UKCA Declaration of Conformity.pdf

CCS Type Approval Certificate X2 extreme sealed

​CCS Type Approval Certificate X2 extreme sealed

• CCS Certificate HK17T00011_X2 extreme_Sealed_Variants (PROD CERT - 1390963 - 1 - A1) - 1.PDF

CCS Type Approval Certificate X2 extreme

​CCS Type Approval Certificate X2 extreme

• CCS Certificate HK17T00007_X2 extreme_panel_mount_variants (PROD CERT - 1266795 - 1 - A1) - 1.PDF

BV Type Approval Certificate X2 extreme

​BV Type Approval Certificate X2 extreme

• 50067_B0 BV.pdf

BV Type Approval Certificate X2 extreme sealed

​BV Type Approval Certificate X2 extreme sealed

• 51497_B0 BV.pdf

​CCS Marine Certificate X2 extreme, pro, control, marine

​CCS Marine Certificate X2 extreme, pro, control, marine

• GB23PTB00058_certFile.pdf
• HK24PTB00008_Cert.pdf

KR Type Approval Certificate X2 extreme sealed

​KR Type Approval Certificate X2 extreme sealed

• KR TAC_X2 extreme_Sealed_Variants (PROD CERT - 1320616 - 1 - A1) - 1.PDF

KR Type Approval Certificate X2 extreme

​KR Type Approval Certificate X2 extreme

• KR TAC_X2 extreme_Panel_Mount_Variants (PROD CERT - 1288975 - 1 - A1) - 1.PDF

NKK Type Approval Certificate X2 extreme sealed

​NKK Type Approval Certificate X2 extreme sealed

• X2 Extreme SL_ClassNK Type Approval Certificate_TA23155M.pdf

NKK Type Approval Certificate X2 extreme

​NKK Type Approval Certificate X2 extreme

• X2Extreme_NKK_TA24630M.pdf

X2 extreme (SC) / BoX2 extreme (SC) update IECEx ATEX 2021

​update IECEx  ATEX 2021

• DEMKO 17 ATEX 1900X Rev. 4.pdf
• IECEx UL 17.0058X 004.pdf

DoC battery X2 extreme

​​DoC battery X2 extreme

• BR2330,EDBD-B24025-01,DoC.pdf
• BR2477A,EDBD-B24024-01,DoC.pdf

Cable CAB113: Cable for ModBus RS485 between X2 panel and BFI

• 6222S1.pdf

Outline drawings, X2 extreme 7, 12, 15

​Outline drawings, X2 extreme 7, 12, 15

• extreme12 outline_DDOC-00029A.PDF
• extreme12 outline_DDOC-00029A_HP.DWG
• extreme12 outline_DDOC-00029A_HPS.DWG
• extreme15 outline_DDOC-00030A.PDF
• extreme15 outline_DDOC-00030A_HP.DWG
• extreme15 outline_DDOC-00030A_HPS.DWG
• extreme7 outline_DDOC-00028A.PDF
• extreme7 outline_DDOC-00028A_HP.DWG
• extreme7 outline_DDOC-00028A_HPS.DWG

Cutout drawings, X2 extreme 7, 12, 15​

Cutout drawings, X2 extreme 7, 12, 15​

• X2 extreme 12_all_Cutout Drawing.PDF
• X2 extreme 15_all_Cutout Drawing.PDF
• X2 extreme 7_all_Cutout Drawing.PDF

CAB153 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

RS422 panel side termination plug​
Used when RS422 point to point communication is used 

CAB150 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

​3 way splitter cable
Used when 2xRS485 are needed

• CSS-DWG-1509005 100-0526 CAB150.pdf

CAB101 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB101 Cable between MELSEC Q and  X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB101_3m.pdf

CAB100 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between GE Fanuc and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB100_3m.pdf

iX Developer Reference Manual, MAEN355 rev. B (current version)

• iX250 ReferenceManual MAEN355B.pdf.pdf

X2 base / pro / extreme / marine / control - Configuration and Image manual , MAEN352 rev B

MAEN352B: describes the X2 series system program V2.2 and later . 

This manual replaces MAEN205 rev. G

• X2_Configuration_MAEN352B_2024-05-02.pdf

​New manuals for protection class ec

New manuals for protection class ec​

• X2_extreme_12_CO_MAEN323B_English.pdf
• X2_extreme_12_HP_MAEN256B_English.pdf
• X2_extreme_12_MAEN255B_English.pdf
• X2_extreme_15_CO_MAEN310B_English.pdf
• X2_extreme_15_HP_MAEN261B_English.pdf
• X2_extreme_15_MAEN260B_English_new.pdf
• X2_extreme_7_12V_CO_MAEN311B_English.pdf
• X2_extreme_7_12V_MAEN250B_English.pdf
• X2_extreme_7_CO_MAEN312B_English.pdf
• X2_extreme_7_HP_MAEN251B_English.pdf
• X2_extreme_7_HP_web_MAEN338B_English.pdf
• X2_extreme_7_MAEN249B_English.pdf

X2 Extreme CO Manuals

​X2 Extreme CO Manuals

• X2_extreme_12_CO_MAEN323_English.pdf
• X2_extreme_15_CO_MAEN310_English.pdf
• X2_extreme_7_CO_MAEN312_English.pdf

Manual: Solution EtherCAT communication Nexto PLC/X2control with BFI-P2 BFI-H3

• SER0017_QS_BFIP2H3_EtherCat_V2.0.0-EN.pdf

Manual: Solution Modbus RTU communication Nexto PLC/X2control/PIO with BFI-P2 BFI-H3 BFI-E3

• SER0015_QS_BFI_ModbusRTU_V2.0.0-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-E3

• SER0020_QS_BFIE3_ModbusTCP_V1.0.2-EN.pdf

Manual: Solution Modbus TCP communication Nexto/X2control/PIO PLC with BFI-P2 BFI-H3

• SER0014_QS_BFIP2H3_ModbusTCP_V1.0.3-EN.pdf

​Guidelines for TxA and TxB migration to X2.

​​Guidelines for TxA and TxB migration to X2.

• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pdf
• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pptx

MTBF X2 extreme

​MTBF X2 extreme

• MTBF Summary - X2 extreme_V2.docx

iX and Allen-Bradley Ethernet CLX

Allen-Bradley ControlLogix and CompactLogix

The E and E1000 series has a driver named Allen-Bradley Ethernet CLX.
This driver is not available in iX Developer. However, that is just the name.
The E1000 variant is actually a limited Ethernet/IP driver, so when converting an E1000 project to iX platform, one can use the Allen-Bradley Ethernet/IP driver instead. This driver also suports newer systems such as the Micro 800, 820 and 850 controllers.   

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

Remote Access Viewer v1.5.4, for Exter/E1000 - TxA/TxB/TAxx - X2 panels

Remote Access Viewer is a program for remote access and control Exter/E1000 - TxA/TxB/TAxx - X2 panels.

It is possible to access, reflect and control panels from a PC by using the VNC client program, Remote Access Viewer (freeware), together with the built-in VNC server (Remote Access function) in the iX Panels.

NB: Even though the help file suggests another key combination, please note that Ctrl-Alt-Shift-F toggles Full screen mode on / off best, so you Restore from Fullscreen mode with this key combination! 

vncviewer.exe_patch.zip contains a patched vncviewer.exe

• MA00756.pdf
• RemoteAccessViewerSetup 1.5.4_iX.exe
• vncviewer.exe_patch.zip

FTDI Direct driver demo

​This demo covers the utilization of the FTDI direct driver.

• FTDI_D2XX_Demo (X2 control 12).7z

EDS file for CiX-CAN and X2

EDS_CiX-CAN.zip includes EDS files for the CiX-CAN module:

CiXCANopen.eds                                      General EDS file

CiXCANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

CiXCANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

CiXCANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

CiXCANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

EDS_X2.zip includes EDS files for the internal CAN on X2 (extreme) panels:

X2CANopen.eds                                      General EDS file

X2CANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

X2CANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

X2CANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

X2CANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

​

• EDS_CiX-CAN.zip
• EDS_X2.zip

X2 control / X2 extreme SC / X2 marine SC / BoX2 pro SC / BoX2 extreme SC, CODESYS Device XML 3.5.13.30.1 (Current version)

​Device descriptor files for the X2 series, Soft Control editions of HMI and Edge devices. This version is to be used on runtime 3.5.13.30 patch 7 or higher and in conjuction with X2 series images, version 2.0 or higher. Link to image 2.0 b368

• v3.5.13.30.1.zip

X2 series (German)

​36-page brochure incl. general and product family descriptions, technical data, iX and WARP software descriptions, migration paths, etc.

• BRDE631E - X2 brochure_2019_15aug.pdf

X2 brochure (Spanish)​

X2 brochure (Spanish)​

• BRES631A- X2 brohure_low.pdf

X2 brochure 2019 (French)

• BRFR631E - X2 brochure_2019_15aug.pdf

X2 brochure (English), BREN631

​​36 page brochure incl. general and product family descriptions, technical data, iX and acirr+ software descriptions, migration paths, etc. Incl. X2 extreme, X2 pro21 and two-year warranty

• BREN631F - X2 brochure_210309.pdf

X2 series Custom Welcome Screen (splash), template

​Template file for customising the Welcome Screen, refer to X2 image manual.

Custom Welcome screen is supported on X2 base v2 and X2 pro/marine/control/extreme. Currently only X2 base v2 and X2 extreme support customization using this .cfg file and this require the latest versions of the system programs (X2 base V2 v1.02 b280 | X2 extreme v2.1 b430).

• iXCustomSplash.zip